IEC 61851-1ELECTRICAL VEHICLE CONDUCTIVE CHARGING SYSTEMWith electric vehicles (EA), environmental, economic and technological advances, their availability has become important. The shortage of decreasing natural resources actually caused this situation. However, if the carbon emission damage of internal combustion engines to the environment is taken into consideration, electric vehicles (EA) are ...
IEC 60884-1Plugs and socket-outlets for household and similar purposes – Part 1: General requirementsIEC 60884-1 standard covers LVD test of fixed and mobile sockets, which are intended to be used inside or outside the building, with or without grounding contacts, with rated voltage between 50 V and 442 V, with rated current not exceeding 32 A, operating with alternating current only.As LVT Test L...
IEC 60598-1 StandardLuminaires - Part 1: General RequirementsWithin the scope of the 2014/35 / EU LVD (Low Voltage Directive) directive, TS EN 60598-1 standard covers the general LVD test related to the luminaires working with supply voltages up to 1000 V combined with electric light sources. Relevant tests and rules in this standard include classification, marking, mechanical construction, elect...
EN / IEC 61368-1CONDUIT SYSTEMS for CABLE MANAGEMENTThese are the systems used to prevent conductors passing current through pipe systems called electrical pipes to prevent environmental damage and protect the conductors from external impacts. Pipes are produced as insulator or metal.To verify this system, it has been gathered under the title of 4 product groups in International standards. These a...
TS EN / IEC 60903GLOVES - FROM INSULATING MATERIAL - WORK UNDER VOLTAGEHigh voltage gloves have an important place in terms of occupational health and safety. It is an important element for safe operation and protecting the operator mechanically and electrically in electrical networks and high voltage units. The most important factor to be considered during use of high voltage gloves is the level ...
TS EN / IEC 62271-1HIGH VOLTAGE SWITCHGEAR and CONTROLGEARType tests for high voltage switchgear and controlgear (Circuit Breaker, Disconnector, Load Disconnector, Fused Cell, Cell, Metal Clad, RMU, Metal Enclosure and Concrete Kiosk), rules for high voltage switching and control devices and the uniformity of verification within included tests. Type tests are carried out in independent accredited ...
IEC 61641INTERNAL ARC TESTLow voltage and switching devices (Electric Panels) for factory, workshop, power plants, work places etc. provides the distribution and switching of electrical energy. Low voltage and switching devices (Electric Panels) differ according to their usage and purpose. Low voltage and switching devices (Electric Panels) internal arc condition may occur during use. The internal
IEC / EN 60947 STANDARD (Low Voltage Switchgear and Controlgear) (Part 1: General rules)The switchgear and controlgear type test is used to ensure the consistency of all the rules and features applicable to the low voltage control device and switching arrangement as much as possible, in order to obtain a regularity in the rules and tests throughout the relevant range of the equipment and to preven...
Test and calibration laboratories carry out their work within the scope of the TS EN ISO / IEC 17025 general requirements standard for the competence of test and calibration laboratories.TS EN ISO / IEC 17025 General requirements standard for the competence of test and calibration laboratories includes many new structural changes in applications with the 2017 revision.Unlike the 2005 version, the
What is Accreditation ?Accreditation is the quality infrastructure applied to ensure the reliability and validity of the works of conformity assessment institutions (test and inspection reports, calibration certificates, management system documents, product documents, personnel documents etc.) within the framework of internationally accepted standards.Conformity assessment bodies Based on the crit...
